WOW0821240209BLCLJLLLML

My Cart
Checkout Secure

The Ultraflex T67 steering helm is suitable for use with the M58 range of steering cables

FEATURES AND TECHNICAL SPECIFICATIONS:
  • All stainless steel output end of cable as per ABYC P17 safety standards
  • Corrosion resistant materials
  • Standard friction externally adjustable
  • 90° bezel
  • Four optional helm positions to facilitate steering cable installation
  • Lock-to-lock steering wheel turns: approx. 2,5
  •  Stroke: 230 mm (9”)
  • Maximum allowable steering wheel diameter: 380 mm (15”)
  • Minimum steering cable bend radius: 200 mm (7,9”)
  • Exceeds EN 29775 safety standards
  • APPLICATIONS: for use with outboard engines up to 40 kW (55 hp) with the exception of EVINRUDE E-TEC™ 50 for which the use of T85 or T71FC is recommended.

      Suggestions and Warnings when Selecting a Mechanical Steering System  

      Selection of the appropriate mechanical steering system is an important factor for the safety and functionality of your boat. The combination of engine power, hull type and boat speed influence the correct selection of the steering system. The load on the steering system increases with the boat speed and engine power; the torque generated by the propeller rotation in high power outboard applications can make it hard to steer. Big boats with displacement hulls & inboard or stern drive engines, can generate high rudder loads: in these cases a mechanical steering systems will be inadequate and we suggest the use of hydraulic steering. We always recommend consulting qualified personnel when selecting, installing and maintaining a steering system for your boat.

      Use and Maintenance

      The steering cable must be installed avoiding excessive and/or tight bends. This will provide the driver with easy handling at all speeds; reduce system inefficiency, & excess play in the system. Marine corrosion may cause the materials to deteriorate affecting manoeuvring efficiency and in the worst case, system failure. By following the engine manufacturers specifications, the steering cable end fittings and engine cable support must be cleaned and greased periodically. The steering cable must be regularly inspected. If steering becomes hard, inconsistent, cuts on the conduit surface are noticed, or any other component found damaged the cable must be replaced immediately. When storing your boat for an extended period of time we recommend removing the steering cable end fitting from its engine side support and cleaning adequately
      QUALITY SYSTEM
      The Ultraflex Quality System is certified CISQ-EQ Net by the Italian Shipping Registry (RINA), in conformity with the UNI EN ISO 9001 rule. Certification N420/96. The quality system involves all the company resources and processes starting from the design, in order to : • Assure product quality to the customer • Set up the actions to maintain and improve the quality standards constantly • Pursue a continuous process improvement to meet the market needs. The hydraulic marine products are constantly tested in order to verify their conformity with the EEC 94/25 and the ISO 10592 requirements.
      Shipping
       This Item Ships to 
      Delivery

      Estimated between  and

      Will usually ship within 1 business day.

            

      Please allow 5 days for your order to arrive.  We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

      Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

       

       

      The Ultraflex T67 steering helm is suitable for use with the M58 range of steering cables

      FEATURES AND TECHNICAL SPECIFICATIONS:
      • All stainless steel output end of cable as per ABYC P17 safety standards
      • Corrosion resistant materials
      • Standard friction externally adjustable
      • 90° bezel
      • Four optional helm positions to facilitate steering cable installation
      • Lock-to-lock steering wheel turns: approx. 2,5
      •  Stroke: 230 mm (9”)
      • Maximum allowable steering wheel diameter: 380 mm (15”)
      • Minimum steering cable bend radius: 200 mm (7,9”)
      • Exceeds EN 29775 safety standards
      • APPLICATIONS: for use with outboard engines up to 40 kW (55 hp) with the exception of EVINRUDE E-TEC™ 50 for which the use of T85 or T71FC is recommended.

          Suggestions and Warnings when Selecting a Mechanical Steering System  

          Selection of the appropriate mechanical steering system is an important factor for the safety and functionality of your boat. The combination of engine power, hull type and boat speed influence the correct selection of the steering system. The load on the steering system increases with the boat speed and engine power; the torque generated by the propeller rotation in high power outboard applications can make it hard to steer. Big boats with displacement hulls & inboard or stern drive engines, can generate high rudder loads: in these cases a mechanical steering systems will be inadequate and we suggest the use of hydraulic steering. We always recommend consulting qualified personnel when selecting, installing and maintaining a steering system for your boat.

          Use and Maintenance

          The steering cable must be installed avoiding excessive and/or tight bends. This will provide the driver with easy handling at all speeds; reduce system inefficiency, & excess play in the system. Marine corrosion may cause the materials to deteriorate affecting manoeuvring efficiency and in the worst case, system failure. By following the engine manufacturers specifications, the steering cable end fittings and engine cable support must be cleaned and greased periodically. The steering cable must be regularly inspected. If steering becomes hard, inconsistent, cuts on the conduit surface are noticed, or any other component found damaged the cable must be replaced immediately. When storing your boat for an extended period of time we recommend removing the steering cable end fitting from its engine side support and cleaning adequately
          QUALITY SYSTEM
          The Ultraflex Quality System is certified CISQ-EQ Net by the Italian Shipping Registry (RINA), in conformity with the UNI EN ISO 9001 rule. Certification N420/96. The quality system involves all the company resources and processes starting from the design, in order to : • Assure product quality to the customer • Set up the actions to maintain and improve the quality standards constantly • Pursue a continuous process improvement to meet the market needs. The hydraulic marine products are constantly tested in order to verify their conformity with the EEC 94/25 and the ISO 10592 requirements.
          Shipping
           This Item Ships to 
          Delivery

          Estimated between  and

          Will usually ship within 1 business day.

                

          Please allow 5 days for your order to arrive.  We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

          Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

           

           

          QUESTIONS & ANSWERS

          Have a Question?

          Be the first to ask a question about this.

          Ask a Question

          Recently Viewed



          Added to cart!