The Mercury single-cylinder four-stroke outboard motors are true lightweights, making them easy to move on and off any boat's transom. Integral fuel tank.

On selling this outboard, the "Pre-Delivery inspection is performed by Qualified Mercury Technicians. This means the correct quantity of Mercury Engine Oil is added to the engine and the gearcase oil is also checked for the correct level. All grease points are greased including mounting thumbscrews. The outboard is then run for 10 minutes and carburettor adjustments take place if required. 

On customer hand-over,the outboard is started and run in test tank to show starting and running procedures.The Mercury 5 Year warranty begins on completion of the Customer Warranty Registration.

2.5 Four-stroke Specifications:

HP/Kw @ Prop - 2.5 / 1.9 • Full throttle RPM - 4500-5500 • Cylinder Configuration - 1

Displacement (CID / CC) - 5.2 / 85 • Bore and Stroke (in / mm) - 2.16 x 1.42in 55 x 36mm

Fuel Induction System - 2-valve pushrod (overhead valve)

Ignition - CDI w/electronic spark advance

Fuel System - Carburettor

Cooling System - Water-cooled with thermostat

Starting - Manual

Gearcase Ratio - 2.15:1

Gear Shift - F-N

Steering - Tiller with 360° turning

Trim System - 4 position

Exhaust System - Above prop

Shallow water trim range (degrees) - 16

Recommended Oil - Quicksilver 4-Stroke Outboard Oil

Recommended Fuel - 87 octane/up to 10% ethanol

Integral fuel tank (gal / L) - 0.3 / 0.95

Engine Protection Operator Warning System - Over-rev

Short Shaft Length - 15 in (381mm) Short Shaft only

Dry Weight * Lightest model available 40lbs / 18kg

CARB Star Rating - 3

Warranty - 5 Years