WOW0821240209BLCLJLLLML

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.

Multiple rows of high-load ball bearings and precise V-shape reduce friction, allowing Harken cam cleats to activate with the snap of the wrist. No need for draw-through cleating: a downward flick snaps the sheet into the cam and stays exactly where you put it. Flick up and the cleat releases instantly, even under high loads. Harken cleats are the only cleats that engage under maximum line tension.

  • Height  30 mm
  • Length 65 mm
  • Width 32 mm
  • Weight 71 g
  • Minimum line Ø 3 mm
  • Maximum line Ø 12 mm
  • Fastener spacing 38 mm 
  • Fasteners 5 mm FH 
  • Maximum working load  136 kg
  • Breaking load 340 kg
  • Pawls Aluminum 

Cam Cleat Kits                   

Multiple rows of high-load ball bearings and precise V-shape reduce friction, allowing Harken cam cleats to activate with the snap of the wrist. No need for draw-through cleating: a downward flick snaps the sheet into the cam and stays exactly where you put it. Flick up and the cleat releases instantly, even under high loads. Harken cleats are the only cleats that engage under maximum line tension.

  • Wire fairleads maintain a low profile while holding the line close to the cleat.
    Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wire fairlead.
  • The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat.
    Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 375 X-Treme Angle Fairlead.
  • Fast Release fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker take-downs during mark roundings—anywhere fast release is crucial. Harken Cam fairleads are made of tough, abrasion-resistant composite.
    Includes 150 Cam-Matic® cleat.


Full range of accessories: Fairleads, wedge kits, and bases.

    Shipping
     This Item Ships to 

    Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.

    Multiple rows of high-load ball bearings and precise V-shape reduce friction, allowing Harken cam cleats to activate with the snap of the wrist. No need for draw-through cleating: a downward flick snaps the sheet into the cam and stays exactly where you put it. Flick up and the cleat releases instantly, even under high loads. Harken cleats are the only cleats that engage under maximum line tension.

    • Height  30 mm
    • Length 65 mm
    • Width 32 mm
    • Weight 71 g
    • Minimum line Ø 3 mm
    • Maximum line Ø 12 mm
    • Fastener spacing 38 mm 
    • Fasteners 5 mm FH 
    • Maximum working load  136 kg
    • Breaking load 340 kg
    • Pawls Aluminum 

    Cam Cleat Kits                   

    Multiple rows of high-load ball bearings and precise V-shape reduce friction, allowing Harken cam cleats to activate with the snap of the wrist. No need for draw-through cleating: a downward flick snaps the sheet into the cam and stays exactly where you put it. Flick up and the cleat releases instantly, even under high loads. Harken cleats are the only cleats that engage under maximum line tension.

    • Wire fairleads maintain a low profile while holding the line close to the cleat.
      Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wire fairlead.
    • The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat.
      Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 375 X-Treme Angle Fairlead.
    • Fast Release fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker take-downs during mark roundings—anywhere fast release is crucial. Harken Cam fairleads are made of tough, abrasion-resistant composite.
      Includes 150 Cam-Matic® cleat.


    Full range of accessories: Fairleads, wedge kits, and bases.

      Shipping
       This Item Ships to 

      QUESTIONS & ANSWERS

      Have a Question?

      Be the first to ask a question about this.

      Ask a Question

      Recently Viewed



      Added to cart!